How to Replace a Flashlight Bulb on a Mini Mag
- 1). Unscrew the battery cap from the back end of the Mini Mag with your fingers. Remove the batteries from the battery compartment. Place the batteries and the battery cap aside for reassembly later.
- 2). Unscrew the reflector from the front end of the Mini Mag with your fingers. Remove the reflector from the front end of the Mini Mag. Remove the retaining ring, if present, from the front end of the Mini Mag. Place the reflector and retaining ring aside for reassembly later.
- 3). Clamp the jaws of the needle-nosed pliers around the base of the bulb that is inside of the front end of the Mini Mag.
- 4). Twist the needle-nosed pliers counterclockwise to loosen and remove the bulb from the module inside of the Mini Mag that it is screwed into. Pull the bulb out of the Mini Mag once it is no longer screwed into the module. Dispose of the bulb properly.
- 5). Clamp the jaws of the needle-nosed pliers around the base of the replacement bulb. Insert the replacement bulb, screw mount first, into the front end of the Mini Mag. Place the replacement bulb into the threaded hole in the module.
- 6). Twist the needle-nosed pliers clockwise to tighten the replacement bulb into the module. Remove the needle-nosed pliers once the bulb is securely screwed into the module.
- 7). Place the retaining ring back onto the front end of the Mini Mag. Screw the reflector back onto the front end of the Mini Mag. Reinsert the batteries into the battery compartment. Screw the battery cap back onto the back end of the Mini Mag.
Source...