Enviracaire Warm Mist Humidifier Operating Instructions
- 1). Place the unit on a surface that is firm and level so it won't tip.
- 2). Turn the power switch off and unplug the humidifier. Take the tanks off the base, turn each one upside down and turn the cap counterclockwise to remove. Fill the tanks with cold water.
- 3). Replace the tank cap, then return the tanks to the base, placing them in the same position as when you picked them up.
- 4). Plug the cord into the wall outlet and turn the power switch to "on." Turn the relative humidity knob in a clockwise direction until you hear a quiet click. It may take several minutes for the unit to warm up.
- 5). Refill the water tanks when the "Refill When Lit" light comes on. This usually happens after 24 hours of run time.
- 6). Turn the power off and let the housing on top of the unit cool to add a medicated vapor to the mist output.
- 7). Add liquid medicine to the medicine cup until it is half full. Place the cup on top of the housing and turn the power back on.
Source...