Factory Specs on the Chevrolet S-10
- The 2002 S-10 carries a 2.2-liter Vortec 2200, displacing 134 inches with a two-valve-per-cylinder overhead valve train. The S-10 has 120 horsepower at 5,000 rpm and 140 pound feet of torque at 3,600 rpm. The maximum speed of the S-10 is expressed as 6,000 rpm.
Its bore and stroke is 3.5 by 3.46 inches. The S-10 compression ratio is 9.0:1 with sequential fuel injection. The fuel tank holds 18 gallons and the engine holds 4.3 liters of oil. - The base curb weight of the two-wheel-drive Regular Cab is 3016 lbs. The vehicle has a step-in height of 17.3 inches with minimum ground clearance of 9.1 inches in the front and 7.2 inches in the rear. The S-10 has a weight distribution of 57 percent in the front and 43 percent in the back, with a wheelbase of 108.3 inches.
The truck's overall length is 190.1 inches, while its overall height is 62 inches and overall width is 67.9 inches. - The S-10 provides 39.5 inches of head room. Leg room in the truck is 42.7 inches, while shoulder room is listed at 56.9 inches, and the vehicle provides 53.6 inches of hip room.
- The S-10 regular cab seats two to three people. The vehicle's gross weight rating is 4,200 lbs. and its payload is 1,184 lbs. The maximum trailer weight is 3,200 lbs. When towing, the tongue load weight should be no more than 750 lbs.
Engine & Fuel
Exterior Dimensions
Interior Dimensions
Capacities
Source...