How to Wire a Camper Plug 50 Amp Outlet
- 1). Locate the electrical box on your camper. Locate the current electrical plug. Use wire cutters to remove the current plug if it is not 50 amps.
- 2). Fold the cable cover back to expose the internal wires. Use the wire cutters to strip a small length of covering from the white, black and green wires.
- 3). Push the end of the green wire into the green slot on the plug. Use the screw driver to tighten the corresponding screw.
- 4). Push the end of the white wire into the silver slot and tighten the corresponding screw to lock the wire in place.
- 5). Push the black wire into the gold slot on the plug and tighten the corresponding screw to lock the wire in place.
- 6). Pull the cable cover over the wires and wrap with electrical tape to secure the plug.
Source...