Photo Frame is a useful gift which is easy to make and easy on the pocket too.
One can freeze a moment of time and immortalize it by making own personal photo frame.
It is a way to show your beloved one how much you care for him or her.
It looks wonderful and it is a great gift as it is a living testimony of one's undying love.
One can make it colorful and attractive with his own creative imagination.
Here are some simple steps to make one to make your beloved one happy.

• The front can be made of brass, copper or German silver and the back of it can be made of a sheet of tin or brass.
  
• One can make the frame round, squire oblong according to his wish.
  It can be made with a round or oval opening in it to suit the imagination.
  
• First the design should be drawn or transfer to surface of the metal and work it in to shape as previously described.
  
• Do not cut the opening or trim the metal sheet to the desired size until it is not hammered, because this draws the metal out.
  
• After making the front one should engage in making the back side of the photo frame.
  It can be made of a sheet of tin or brass.
  First cut the sheet of desired length and breath, then bend over the edge of one end and both of the side edges.
  
• Solder the edges to the back of the frame and then solder a stay, or stand on the back of it.
  It completes the frame and the photograph can be slipped in it between the front and the back.
  

Cleaning and Polishing Brass, Copper and German Silver:

• To clean any of these metals one need to mix some powdered rotten stone with some machine oil and rub them with a pad made of a soft flannel rug.
  
• To polish one must wipe off the rotten stone and oil first.
  Then rub the work with a chamois skin dampened with alcohol and pt some red rogue on it.