How to Turbo Mod an XBox 360 Controller
- 1). Remove the battery pack from the controller. To do this, hold down the release battery pack's release button and pull it apart from the controller's base.
- 2). Unscrew all of the screws from the back of the controller and hold the two halves together.
- 3). Gently pull apart the back of the controller so as not to dislodge any of the components from the inside.
- 4). Locate the right trigger, or RB button and carefully push up on the button so that the head pops free.
- 5). Identify what appears to be a plus sign on the circular piece of plastic from underneath the RB button.
- 6). Place one end of the spring on the plus signed piece of plastic and connect the other end to the circular slot under the RB button's head.
- 7). Snap the RB button back into place making sure the spring is freely able to coil and uncoil, and rescrew the controller back together.
Source...