Instructions for Nasta Bed Rails
- 1). Check your Nasta bed rail kit to make sure all necessary parts are included. The kit should include the bed rails, rubber spacers, rubber expanders, stainless steel bolts, nylon washers and nuts.
- 2). Place the spacer on top of the expander, and make sure the bolts holes are aligned.
- 3). Place the nylon washer on the bolt. Insert the bolt through the bed rail anchor point, spacer and expander.
- 4). Screw the back plate securely on the bolt. Repeat this process for all four anchor points.
- 5). Attach the bed rail to the truck bed by inserting the anchor assemblies into the stake pockets on the top edge of the truck bed.
- 6). Tighten the bolt using a wrench and appropriate socket until the bed rail is secure.
- 7). Repeat this process for the remaining bed rail.
Source...