Have you ever been desperate enough to try the famous towel trick in order to fix Xbox 360 red ring of death quickly? You would not be the first and certainly not the last to try this method because it does actually work for most Xbox 360 owners.
This method will only allow you to play on your console for a short while and is only a short term solution to fixing the Xbox ring of death rather than fixing it permanently.
Quite soon you will find yourself using this method more and more until finally it will become damaged beyond any repair.
You see, this method is only causing further damage to your console and is covering up what actually needs to be done in order to fix the error for good.
It is understandable that gamers want a quick fix solution so they can get back playing their favourite console games again.
But you can discover here today that there are so many other ways to fixing the dreaded red ring of death and you can avoid having to spend a lot of money to buy a new console.
If you have experienced the one red light on your console, then a simple solution is to check that every cable is correctly inserted.
But when it comes to finding ways to fix Xbox 360 red ring of death which usually comes in the from of 3 red lights, then this where you will need to find a more technical and permanent solution.
If your console happens to have this error, please avoid using the famous towel trick and read on for more permanent and cost effective solutions.
Overheating is a major cause as to why so many people are looking for ways to fix the Xbox 360 red rings.
So by wrapping your console up in a towel is only going to add to this heat and will cause more damage to the motherboard and its major components within.
Approximately 90% of gamers do not even know that their consoles can be fixed by themselves at home by using a Xbox 360 repair guide.
In most cases these errors can be eliminated for good in just 1-2 hours.
So why does the Xbox 360 overheat in the first place.
It all comes down to the overall design of the console and you will agree that the Xbox 360 does look good with its slender and sleek modern design.
But this has come at a price because what has happened is there just is not enough room for cooling when it comes protecting the major components from heat.
The heat-sinks that usually protect these components from most of this excessive heat have been down-sized in order to fit in with the new sleek design.
This then causes a lot of movement to the motherboard which can come loose along with the major components that come with it.
In order to fix this you can try these steps yourself at home following below.
1.
Turn off all power and then remove the outer shell along with the faceplate.
2.
Have a good look inside and see if anything is loose from within.
3.
Next take away the fan which is closely located to the main system.
4.
Find the heat-sink which is located at the GPU & CPU and ensure it is still attached well within the system.
Remove and clean any dust or grime which has built up and clean anywhere else which has become clogged up by these household elements.
5.
Once you are satisfied that everything has been cleaned you can begin to re-assemble everything back together.