Using A UV Aquarium Sterilizer To Kill Algae Safely
Using an Ultra Violet or UV Aquarium Sterilizer is one of the safest ways to kill algae in a fish tank.
Traditionally, fish enthusiasts used to rely on various chemicals to kill off the algae from their aquariums but these chemicals have proven to be harmful to the fish and even beneficial bacteria in the water.
Though many people now are moving towards using UV Aquarium Sterilizers, sadly there are still many who use these harmful medication in their tanks.
Ultra Violet Light or UV Light is actually a spectrum that is way lower than the range which our eyes are capable of seeing.
But though we can see it, microscopic organisms are greatly affected by it, with the potential of killing them by disrupting the delicate bonds that binds the atoms in molecules together.
The effect is controllable by the spectrum range, where a range of between two hundred to two eighty would generally be lethal.
This range which is also called the UV-C Spectrum is what we are aiming for when intending to kill algae in the aquarium.
The Ultra Violet Aquarium Sterilizer complements your normal fish tank filters in reducing the green water effect which is commonly blamed on algae in the water.
This is a very important function because if the algae is left untreated, it will not only make the aquarium look unsightly but would also be harmful in the long run to the fish.
When you first decide to fit your aquarium with a UV Aquarium Sterilizer, there are some factors that you would have to consider before making your purchase.
They are the lamp type, lamp length, the design, the water quality and the water flow.
The two types of UV lamps available in the market today are the low pressure and high pressure lamps.
Low pressure lamps target a more specific wavelength and thus is more effective than a high pressure lamp which works on a wide array of wavelengths.
High pressure lamps also tend to produce more heat and light.
In terms of length, the longer the lamp, the more amount of water will be exposed to the UV light.
But you would also need to take the size of the tank into consideration.
The design of the UV Aquarium Sterilizer determines how far the water needs to travel from the lamp exposure area to the water containment chamber.
The quality of the water is measured by the Percent Transmittance where a higher Percent Transmittance would allow a more effective treatment using an Ultra Violet Aquarium Sterilizer.
The water flow rate is the measured by the amount of water that flows through the sterilizer.
These are some of the factors that you would have to study about your own fish tank before you go out and purchase your own UV Aquarium Sterilizer.
Making the right decisions will ensure that the sterilizer you purchase would not only last longer and save on costs but would also give a more effective tank cleaning.
Traditionally, fish enthusiasts used to rely on various chemicals to kill off the algae from their aquariums but these chemicals have proven to be harmful to the fish and even beneficial bacteria in the water.
Though many people now are moving towards using UV Aquarium Sterilizers, sadly there are still many who use these harmful medication in their tanks.
Ultra Violet Light or UV Light is actually a spectrum that is way lower than the range which our eyes are capable of seeing.
But though we can see it, microscopic organisms are greatly affected by it, with the potential of killing them by disrupting the delicate bonds that binds the atoms in molecules together.
The effect is controllable by the spectrum range, where a range of between two hundred to two eighty would generally be lethal.
This range which is also called the UV-C Spectrum is what we are aiming for when intending to kill algae in the aquarium.
The Ultra Violet Aquarium Sterilizer complements your normal fish tank filters in reducing the green water effect which is commonly blamed on algae in the water.
This is a very important function because if the algae is left untreated, it will not only make the aquarium look unsightly but would also be harmful in the long run to the fish.
When you first decide to fit your aquarium with a UV Aquarium Sterilizer, there are some factors that you would have to consider before making your purchase.
They are the lamp type, lamp length, the design, the water quality and the water flow.
The two types of UV lamps available in the market today are the low pressure and high pressure lamps.
Low pressure lamps target a more specific wavelength and thus is more effective than a high pressure lamp which works on a wide array of wavelengths.
High pressure lamps also tend to produce more heat and light.
In terms of length, the longer the lamp, the more amount of water will be exposed to the UV light.
But you would also need to take the size of the tank into consideration.
The design of the UV Aquarium Sterilizer determines how far the water needs to travel from the lamp exposure area to the water containment chamber.
The quality of the water is measured by the Percent Transmittance where a higher Percent Transmittance would allow a more effective treatment using an Ultra Violet Aquarium Sterilizer.
The water flow rate is the measured by the amount of water that flows through the sterilizer.
These are some of the factors that you would have to study about your own fish tank before you go out and purchase your own UV Aquarium Sterilizer.
Making the right decisions will ensure that the sterilizer you purchase would not only last longer and save on costs but would also give a more effective tank cleaning.
Source...