How to Assemble a Bonavita Cabana Crib
- 1). Insert the crib feet into the left and right legs on the headboard and footboard and screw in the threaded screws. Tighten them until they are secure.
- 2). Attach the stabilizer bars to connect the left and right sides of the crib, one toward the headboard and the other toward the footboard. Insert a barrel nut into each predrilled hole in the stabilizer bar. Align the barrel nuts to to capture the bolts. Insert a 3 1/8 bolt into each nylon washer, hole and barrel nut. Tighten all bolts with the Allen wrench that came with the crib.
- 3). Place a Phillips head screw through the stabilizer bar in the mattress support and then through the support bracket. Secure it with a wing nut. Choose a position for the mattress. Select the highest one for a newborn and lower it as your child grows. Insert a Phillips head screw in the correct hole for the mattress position, then through the support bracket, and tighten with a wing nut. Repeat on all four brackets.
- 4). Secure the headboard to the crib using two Allen head bolts and washers on the left bottom leg and two Allen head bolts and washers on the right bottom leg. Tighten with the Allen wrench.
- 5). Install the footboard. Prethread the four Allen head bolts into each predrilled hole in the bottom left and right legs of the foot board. Attach the footboard. Secure the Allen head bolts with the Allen wrench. Insert the 2-inch Allen head bolts through the inside edge of the crib sides and into the footboard. Secure with the Allen wrench.
Source...