You may have come across with the Problem  that while running or when you  start the computer their Hard Drive stop responding  in between .In order to detect problem exact PCB is replaced with part no./firmware but even if after the replacement of exact PCB the spindle motor or read write head did not respond , conclusion may be  that some of the component of PCB is overheated , even in some of the cases spindle motor is totally jammed and if we remove the read write head then there is the chances of damaging the Read/Write head or the Read Write Area/Platter. But to handle these situation Hard Drive Data Recovery experts  has developed and launched NEW Tool Kit named Spindle Motor Unstuck Tool to Release the Jammed Motor of Spindle and retrieve the Data .

Following are the Usage of the Spindle Motor Unstuck Tool:

1) Whenever spindle motor gets jammed and does not show any moment this Spindle Motor Unstuck Tool is attached to the motor and attempt to rotate it until the motor does not get free and appear to in its original position. The advantage of using this tool is that the Read/ Write head remains absolutely ok and does not get damaged.

2) Hard Drives are commonly dropped; in such a case crashed external drive while spin will sustain a physical damage or head crash. To overcome the problem the Spindle Motor Unstuck Tool is used to release the jammed motor by continuously rotating the motor.

3) Lightning can cause electrical problems quite severe too, most people think that a surge protector will protect them but often the surge can be big enough that your protector gets destroyed and your data is still affected. We have Spindle Motor Unstuck Tool to repair the hard drive.

4) Whenever Power fluctuates the Read /Write head discontinue running between the platters where the data is reserved. And motor is not capable to carry out any moment. But using this Spindle Motor Unstuck Tool influence the motor to rotate and get the read write head to its original position from where the Read /Write Head reads the data.

Without using this tool if you try to retrieve the data from jammed motor then there is a 90 % possibility of Read /Write head or Read Write Area /Platter to get damage

HDRC : Hard drive Data Recovery Company launched  Spindle Motor Unstuck Tool which is capable and proficiently support jammed  spindle to make  it easier to recover data from Samsung, Seagate and Maxtor hard drives including Laptop .

Following are the tools that have been developed and tested successfully by HDRC :

• SUS -005: Tested on Samsung ( supports 40 GB to 300 GB )& Tested on Seagate (supports 500 GB to 1000 GB)
• SUS-006: Tested on Seagate ( supports 40 GB, 80 GB & 500GB )
• SUS -007:Tested on Maxtor (supports 80 GB to 160 GB)
• SUS-008: Tested on Laptop ( supports 10 GB to 160 GB )