How to Make a Cheap & Safe Life-Size Wrestling Ring
- 1). Lay four 20-foot steel beams on the ground in a square.
- 2). Lay 10 20-foot steel beams on the ground around one foot apart and tie them to the beams you laid on the ground in the step above. This will create the foundation of your wrestling ring.
- 3). Lay wood paneling crosswise over the steel beams. This will make the floor, although it will not yet be padded.
- 4). Put one 5-foot steel beam at each corner of the ring. Drive it into the ground to ensure that it stands up.
- 5). Lay foam padding over the wood floor and tie it to the corners.
- 6). Clip three pieces of ring rope covered in hydraulic tubing to each of the corners. This is a special piece of material that sticks directly out from the corner.
- 7). Cover each of the pieces of hydraulic tubing with a turnbuckle cover. This pads it so that you can run into it without damaging yourself.
- 8). Attach the corner protectors to one another with rope. They should be tight enough to stay up and provide a firm base so you can't fall out while wrestling.
Source...