How to Make a Car With Lifesavers
- 1
Windshield attached
Attach windshield. Fold back two corners on the left side of one stick of gum in foil. Glue to Lifesaver roll about 1 inch from the front end. - 2
Pipe cleaner detail
Add pipe cleaner. Cut a 3-inch piece of pipe cleaner and glue to the Lifesaver roll roughly 2 inches from the back of the car. - 3
Gum packs added to sides
Glue one pack of gum to either side of the Lifesaver roll. - 4
Foil Bumpers
Fold two empty foil gum wrappers into rectangular strips that are roughly 2 inches long and 1/2 an inch wide, These will serve as front and rear bumpers for the car. - 5
Bumpers attached
Attach foil bumpers by running a thin bead of glue along the inside of the foil strip and carefully attaching to either end of the Lifesaver roll. - 6
Secure tires to sides
Add the tires. The four chocolate peppermint candies will serve as tires. Simply attach candies to each end of the gum packs with glue gun. The hot glue on the foil may take a moment or two to set, so each tire will need to be held gently in place until secure.
Source...