How to Change the Cover on a Motorola RAZR V3a
- 1). Turn off your Razr V3a. Flip it open and use your tweezers to remove the four rubber stoppers located on each corner of the LCD screen display. Save these screws.
- 2). Use your small Phillips screwdriver to remove the four screws from the corners of the display. Save all the screws.
- 3). Close your phone and insert the tip of your flat-head screwdriver in the seam on the side of the phone, between the top cover and bottom housing. Gently pry up the top cover and pop it off the phone.
- 4). Fit the new cover (available online or from your Motorola retailer) over the housing and press down until it snaps into place. Make sure it's secure by pressing down on each corner of the cover. Open your phone, replace the four rubber stoppers and four screws and you're done.
Source...