How to Connect a Terk TV42 to a DiSEqC Switch
- 1). Fasten one side of the coaxial cables to the connection ports on the Terk TV42 antenna.
- 2). Connect the other side of the coaxial cable to one of the "IN" jacks on the DiSEqC switch.
- 3). Fasten the coaxial cables from your satellite dish or other antenna to the remaining "IN" jacks on the DiSEqC switch.
- 4). Connect another coaxial cable to the "OUT" jack on the switch, and connect the other side of the cable into the "LNB IN" port on your satellite receiver or the "TV IN" port on your TV.
Source...