How to Troubleshoot Chlorine Injectors
- 1). Shut off water flow to the injector. Simply turn off the pool system, including the filter and pump. Unscrew the injector's lid and remove.
- 2). Remove the small plastic "filter" screen from the bottom of the injector's interior. Spray water over the screen to rinse away any buildup that may hamper water flow. Place the cleaned screen back into the injector.
- 3). Screw the injector lid loosely onto the injector body. Turn on all pool equipment, including the pump and filter. Wait while water fills the injector body. Screw the lid firmly into place, once the injector leaks water from under the lid. This process forces air and vapors out of the injector lines, preventing vapor locks.
Source...