How to Paint an Oak Table Acrylic
- 1). Clean off any dirt or grease from the table with your cleaning solvent and scrub brush. Unclean spots on the wood will cause flaws in the paint if they are still there when the first coat is applied.
- 2). Run the sandpaper over the surface of the table -- and any other part you want painted -- to smooth the wood down in preparation for the paint. Sand any finished pieces of the table harder than the non-finished pieces. This will scuff the finish and allow the primer to establish a stronger bond.
- 3). Clean off the sanding dust with a dust cloth.
- 4). Move the table outside to a well-lit and ventilated area. This will help disperse the paint fumes, and will also prevent spills or paint drops from marring your floor.
- 5). Fill any dings or cracks in the table with wood putty using your putty knife. This will prevent the paint from pooling in said cracks. Sand the putty down after it dries so that it is smooth and flush with the surrounding wood. Clean the sanding dust off again.
- 6). Paint a coat of acrylic-based primer onto every piece of the table you want painted.
- 7). Wait for the primer to dry -- a process that typically takes several hours, depending on the type of primer you use -- before continuing.
- 8). Lay down the first coat of paint onto the oak table. Use long, smooth strokes of the brush on flat surfaces and light dabs on any engraved or curved surfaces that might exist. Do not let the paint pool in any corners or crevasses.
- 9). Wait for the paint to dry, then add more coats as necessary to achieve a uniform look and texture.
Source...