Replacing the Roofing on Your Connecticut Home
Roofs are built to last about 50 years, although this number varies with the materials used. If a new roof is needed on your Connecticut home, one of two approaches is taken by contractors: tearing up the old materials and adding new shingles or placing the new shingles on top of the old. While roofs can legally have two layers of material on top, taking off the old shingles allows contractors to find any damage below and fix it before a new roof is added.
When a Connecticut roofing company goes to add a new roof to your home, its workers will strip off all of the old materials first. Doing this procedure allows them to inspect the sheathing and find any possible problems. Once the installation starts, adding an ice and water shield is usually the first step. Contractors will add the ice and water shield to critical areas and around the perimeter; the width of this border is about three to six feet. Then, the chimneys are re-leaded, and the vent pipe gaskets replaced.
Workers will also check the gutters for damage. In some cases, the gutters may need to be replaced along with the roof.
After the gutters are examined, workers build out the soffit and add ridge vents to increase ventilation in the attic. Once all of these procedures are completed, the shingles, which may be asphalt, architectural, or cedar shake, are added.
You may wonder when the roof on your Connecticut home needs to be replaced. If you are unsure, look for the following signs. While leaks are obvious indicators of damage, missing, torn, cracked, or curled shingles, rusting or missing flashing, and roof particles in the gutter are more subtle indicators. Even if you can't see damage on the outside, the inside of your home, directly under the roof, may show rotting or other abnormal features.
Roofing on Connecticut homes, however, needs to be done in dry weather – neither in rain nor snow. As winter consumes a fair part of the year, examine your roof well in advance of the cold weather. If you notice any of these features above, find a Connecticut roofing professional in your area to assess the damage.
When a Connecticut roofing company goes to add a new roof to your home, its workers will strip off all of the old materials first. Doing this procedure allows them to inspect the sheathing and find any possible problems. Once the installation starts, adding an ice and water shield is usually the first step. Contractors will add the ice and water shield to critical areas and around the perimeter; the width of this border is about three to six feet. Then, the chimneys are re-leaded, and the vent pipe gaskets replaced.
Workers will also check the gutters for damage. In some cases, the gutters may need to be replaced along with the roof.
After the gutters are examined, workers build out the soffit and add ridge vents to increase ventilation in the attic. Once all of these procedures are completed, the shingles, which may be asphalt, architectural, or cedar shake, are added.
You may wonder when the roof on your Connecticut home needs to be replaced. If you are unsure, look for the following signs. While leaks are obvious indicators of damage, missing, torn, cracked, or curled shingles, rusting or missing flashing, and roof particles in the gutter are more subtle indicators. Even if you can't see damage on the outside, the inside of your home, directly under the roof, may show rotting or other abnormal features.
Roofing on Connecticut homes, however, needs to be done in dry weather – neither in rain nor snow. As winter consumes a fair part of the year, examine your roof well in advance of the cold weather. If you notice any of these features above, find a Connecticut roofing professional in your area to assess the damage.
Source...