Homemade Incense Holder
- 1). Choose a smooth-sided plastic water bottle that is several inches taller than your incense sticks, and that has an opening slightly smaller than your keychain ring.
- 2). Wash the plastic bottle and allow it to dry thoroughly.
- 3). Wrap your design around the middle of the bottle, and cover the design completely with strips of clear packing tape.
- 4). Use the scissors to snip a ½-inch hole, about halfway up the side of the bottle, in an area that will not affect the design.
- 5). Pour the sand into the bottle.
- 6). Open the split in the keychain ring and insert the wooden end of the incense stick.
- 7). Light the other end of the stick and lower it into the bottle, point down, so that it is suspended inside the bottle from the keychain ring.
Source...