How to Make a Pearl Cluster Bracelet
- 1). Pull a jump ring open with a pair of round-nosed pliers. Feed the end of the chain and the clasp ring onto the jump ring. Close it with the pliers.
- 2). Feed a head pin through the center of a pearl bead. Bend the pin 90 degrees at the top of the bead, then bend the wire into a loop using the round-nose pliers.
- 3). Slide the loop onto a chain link. Grip the loop of the head pin with chain-nose pliers, and twist the wire so that it wraps to the base of the bead. Cut off any excess wire. Use the chain-nose pliers to crimp the wire's end to the coil you made. Repeat the process to add one more pearl dangle to the link.
- 4). Repeat the process until all the links have pearl dangles hanging from them.
Source...