The Best Way to Cut Rebar
- 1). Inspect the abrasive blade that you'll use in the saw for any defects, including cracks or warps, that could cause it to disintegrate while making cuts. Insert the abrasive cutting blade into the electric saw.
- 2). Check the saw's safety features to make sure the cutting guards are in place, which will prevent sparks and debris from spraying while you make cuts. Inspect the surrounding work area and remove any flammable materials from the vicinity.
- 3). Measure the length of rebar you'll need with a tape measure. Use a writing utensil, such as a white paint marker, to indicate where you'll cut the rebar.
- 4). Lay the rebar on a flat work surface, such as a chop saw's cutting table or wood blocks placed flat on the ground.
- 5). Start the cutting tool by squeezing its power trigger. Push the rotating abrasive blade slowly through the rebar to make cuts. Wait until the blade comes to a complete stop before setting the saw down.
Source...