How to Trace Then Paint
- 1). Tape the source image to a flat work surface such as a drawing table or a light box. Use a window if you don't have a light box and you want to be certain to see all of the detail of the image through the tracing paper.
- 2). Tape the tracing paper over the image.
- 3). Draw the image onto the tracing paper, transferring its lines with the pencil. Select which lines you want to trace carefully, considering how closely you want to imitate the original. Use a mixture of thick and thin lines or make new lines using the source image as inspiration to put your own impression on the tracing.
- 4). Remove the tape from the tracing.
- 5). Flip the tracing over so the reverse side is facing flat on the work surface. Do this on a flat work surface, such as a table, as you do not need the light-transferring capabilities of a window or light box.
- 6). Go over the lines of the tracing on the reverse side with an HB or 2B pencil. Using this type of soft-leaded pencil allows the ink to transfer easily onto the heavyweight paper.
- 7). Tape the heavyweight painting paper to the work surface.
- 8). Center the tracing right side up on top of the heavyweight paper and tape it to the work surface.
- 9). Go over the lines on the tracing again with the pencil to transfer the image to the heavyweight paper. Omit any lines that you don't want to include in the painted version of the image.
- 1). Remove the tracing from the heavyweight paper.
- 2). Paint the image using the pencil rubbing as a guide. Consult the source image for color choices or invent color combinations that appeal to you. Experiment with types of paint and the thickness of your paint application, knowing you can always transfer the traced image onto another sheet of paper if you are not satisfied with the results.
- 3). Finish the painting with a fixative, such as a spray gloss medium, if desired.
Trace the Image
Paint the Image
Source...