How to Install a Cluster Face Glow Kit
- 1). Lift up your vehicle's hood. Disconnect your vehicle's battery with a socket wrench. Remove the negative cable first, then the positive cable.
- 2). Remove the screws securing the instrument cluster to the vehicle. Use a Phillips screwdriver to remove the screws around the cluster and the screws on the cluster itself.
- 3). Pull the cluster out and disconnect its electrical connector. Remove it from the vehicle.
- 4). Remove any fasteners on the face of the cluster. These are usually screws, but they can also be clips. Use a flathead screwdriver to remove the clips and a Phillips screwdriver to remove the screws.
- 5). Remove the face of the cluster by pulling it off. Place the glow face onto the cluster and reattach the clips or screws.
- 6). Place the cluster back into the vehicle and reinstall the screws. Reconnect the battery and close the hood.
Source...