How to Install a Phantom Grip on a Honda
- 1). Remove the small retaining screws on the end cap on the stock handlebar grips using an Allen wrench from the Honda tool set. Pull the end cap off the frame of the handlebar.
- 2). Slide the stock handlebar grip off the handlebar and set it aside. Slide the plastic under cover off the handlebar and set it with the stock grip.
- 3). Slide the Phantom plastic under cover over the handlebar frame. Slide the custom Phantom grip over the plastic cover.
- 4). Place the new custom Phantom grip end cap onto the end of the new grip. Insert the retaining screws that came with Phantom grips into the mounting holes and tighten them using an Allen wrench that came in the tool set with the Phantom grips.
Source...