How to Create Mallet Heads
- 1). Use the tape measure to mark the center of one of the 6-inch-by-3-inch sides of the wood.
- 2). Place the wood in the vise with the pencil mark facing up. Tighten the vise securely.
- 3). Position the drill over the pencil mark and drill a 1 3/4-inch hole through the piece of wood.
- 4). Remove the wood from the vise and smooth the edges with the wood file. Remove any sharp edges.
- 5). Sand the entire piece with 400-grit sandpaper until smooth.
Source...