How to Program a Keyless Entry Remote in a Toyota Camry
- 1). Enter your Toyota Camry with your ignition key and keyless remote. Open and unlock the driver's door and close all of the other doors behind you.
- 2). Insert and remove the key from the ignition twice in a row and then close and open the driver's door twice in a row.
- 3). Insert and remove the ignition key again and close and open the door two more times.
- 4). Insert the key into the ignition again, close the driver's door again and cycle the key to the "On" position and then back to the "Off" position.
- 5). Remove the key from the ignition and wait for the door locks to automatically cycle.
- 6). Press the unlock and lock buttons on your remote for one second, release and then hold the lock button by itself for two seconds. The locks will again cycle to indicate that the programming was successful.
- 7). Repeat step six for any additional remotes, waiting for the locks to cycle each time. Once you are finished, open the driver's door to end the programming sequence.
Source...