How to Add a Keyless Entry to a Toyota Matrix
- 1). Sit down in the driver's seat with the driver's door open. Insert and remove the key twice (do not turn it while it's in the ignition).
- 2). Close the driver's door, then open it. Close it, and then open it again. Insert the key into the ignition, and then remove it.
- 3). Close the driver's door, then open it. Close it, and then open it again. Insert the key into the ignition and leave it. Close the driver's door.
- 4). Turn the ignition to "On," (without cranking) and then turn it back to "Off." Remove it from the ignition. Listen for the power door locks to cycle; if they don't, repeat the procedure.
- 5). Press and hold "Lock" and "Unlock" on the remote for approximately 1 1/2 seconds. Release the buttons, and then hold the "Lock" button for two seconds. When the door locks cycle, the remote is programmed to the Matrix.
Source...