How to Calibrate a Simpson 260 Series 6 Multimeter
- 1). Turn the multimeter on.
- 2). Select the output measurement for your situation, such as 1V DC.
- 3). Check the pointer on the display. It should read zero when the device is not touching anything.
- 4). Locate the screw on the meter cover below the center of the dial.
- 5). Turn the screw clockwise with a small screwdriver.
- 6). Review the display reading. If the pointer has moved away from zero, turn the screw counterclockwise until the pointer is set to zero. If the pointer moved toward zero but is not registering zero yet, turn the screw clockwise until zero is indicated.
Source...