How to Program a Keyless Remote on a Dodge
- 1). Push the "Lock" button on your working remote five times at two second intervals.
- 2). Turn the key in the ignition to "Run." The "Run" position is the furthest you can turn the key before starting the engine. Wait for the chimes to stop.
- 3). Push and hold the "Unlock" button on the working remote for four to ten seconds.
- 4). Press the "Panic" button while holding the "Unlock" button. Then release both buttons at the same time. After about three seconds, your car will chime again to indicate programming mode.
- 5). Push the "Lock" and "Unlock buttons at the same time and release them at the same time on the working remote. There will be another chime.
- 6). Push and release the "Unlock" button on the working remote within 30 seconds.
- 7). Repeat steps 5 and 6 to program your new remote. You can do this for up to four new remotes.
Source...