How to Bend PVC Trim
- 1). Determine the size of the area where the bent piece of trim is going to be installed. Measure the area with a tape measure to determine the angle of the bend and how it is going to be made.
- 2). Select the appropriate piece of molding. Place it on a table or flat surface. Turn on the heat gun. Start on one end of the trim, working toward the other. Do not stay in one place too long, as the trim will burn.
- 3). When the PVC trim has been heated up enough begin forming the trim into the proper shape with clamps. Clamp the trim down to the table at the proper spot. Continue heating slowly until the form has bent into place.
- 4). Allow the PVC at least an hour to cool down before touching it. The trim will be extremely hot. Repeat this process for any other pieces of trim that need to be bent.
Source...