How to Remove a Kenmore Calypso Wash Motion Front Panel
- 1). Unplug the washing machine from its electrical outlet. Pull the machine away from the wall 1 to 2 feet.
- 2). Pry out the Kenmore emblem on the front edge of the top panel, using a putty knife. Remove the screw underneath the emblem with a T-20 Torx screwdriver.
- 3). Slide the top panel toward you half an inch. Raise the panel and rest it against the wall behind the appliance.
- 4). Remove the four screws on the top edge of the washer's front panel with a Phillips screwdriver. Set the removed screws aside; keep them separate from the T-20 Torx screws.
- 5). Pull the front panel toward you and straight up to disengage the clips that hold it in place. Set the removed front panel aside.
Source...