How to Change a Bottom Door Gasket on a Frigidaire GLD2450RDS0 Dishwasher
- 1). Locate the dishwasher breaker in your home's service panel, and then turn it off.
- 2). Open the dishwasher door, and remove the screws around the perimeter of the inner door panel, which secure the outer door panel.
- 3). Close the dishwasher door, but do not latch it, and remove the outer door panel.
- 4). Open the dishwasher door again, and then remove the lower dish rack.
- 5). Grasp the old door wiper gasket with your fingers, and then pull it out of the gasket channel.
- 6). Insert the new door wiper gasket, with the lip on the gasket facing down, into the gasket channel until fully installed.
- 7). Close the dishwasher door and examine the door wiper gasket through the front of the door. Ensure that the gasket is installed evenly, and adjust as needed.
- 8). Replace the outer door panel, and secure it using the screws that were removed.
- 9). Replace the lower dish rack.
- 10
Restore power to the dishwasher.
Source...